Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery on a Chevrolet Spark

Model: Chevrolet Enjoy MK 1 - Years 2010-2022
Part: Battery

If you notice that the battery in your vehicle is dying, you need to replace it. The following description provides the necessary information and steps to achieve this. After opening the hood, locate the battery on the left side and first remove the nuts securing the upper crossmember. Then, disconnect the negative terminal followed by the positive terminal. Next, pull the battery out of its compartment and replace it with the new one. Reconnect the positive terminal first, then the negative terminal, and finally reattach the nuts for the upper crossmember.

Updated on 31 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery on the Chevrolet Enjoy
How to Replace the Key Battery on the Chevrolet Enjoy
Chevrolet Enjoy (2010-2022 / MK 1) If the key for your vehicle no longer opens the doors and does not unlock the central locking, you need to replace the battery. The following descrip…
How to Fix a Starting Issue on the Chevrolet Enjoy
How to Fix a Starting Issue on the Chevrolet Enjoy
Chevrolet Enjoy (2010-2022 / MK 1) As seen in the video, the Chevrolet Enjoy won't start. The best approach in these cases is to diagnose the issue with a tester instead of guessing. T…
Replacing the Front Wheel Bearing on the Chevrolet Enjoy
Replacing the Front Wheel Bearing on the Chevrolet Enjoy
Chevrolet Enjoy (2010-2022 / MK 1) Today, you will see how to disassemble and replace the front wheel bearing on the Chevrolet Enjoy in this brief and simple guide. First, lift the veh…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos