Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Key Battery on the Chevrolet Enjoy

Model: Chevrolet Enjoy MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Key

Video tutorial

If the key for your vehicle no longer opens the doors and does not unlock the central locking, you need to replace the battery. The following description provides the necessary steps for a proper replacement.

First, open the key fob, then remove the back cover of the remote and take out the battery located underneath. Next, take the new battery and insert it into the compartment with the positive terminal facing up. Finally, reposition the cover and snap it back in place.


Updated on 22 July 2026 by ScegliAuto


Related tutorials

Chevrolet Enjoy (2010-2022 / MK 1) Today, you will see how to disassemble and replace the front wheel bearing on the Chevrolet Enjoy in this brief and simple guide. First, lift the veh…
Chevrolet Enjoy (2010-2022 / MK 1) As seen in the video, the Chevrolet Enjoy won't start. The best approach in these cases is to diagnose the issue with a tester instead of guessing. T…
Chevrolet Enjoy (2010-2022 / MK 1) To replace the front brake pads on a Chevrolet Enjoy, lift the vehicle with a jack so that the corresponding wheel is off the ground. Once lifted, re…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Replace the Front Headlamp Bulb in a Kia Stonic?

Regardless of the type of bulb to be used, for example, the video shows how to install an H7 in a headlamp that involves similar work steps to the Kia Stonic, it is important to ensure that the instrument panel and lights are turned off. To replace the front headlamp bulb on the vehicle in question, open the bonnet, remove the plastic rear cap of the headlamp unit, unclip the metal fastener, and extract the bulb holder. Finally, simply remove the bulb to be replaced from the holder, insert the new one, and reassemble everything.

Watch the video!


by ScegliAuto

More videos