Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Left Side Mirror of the Chevrolet Optra Mk1

Model: Chevrolet Optra MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Side mirror

Video tutorial

This guide shows how to replace the left side mirror of the Chevrolet Optra Mk1. The first step is to remove the two screws securing the electric mirror control cover. After detaching the retaining clips of the assembly, disconnect the electrical connectors.

Using a Phillips screwdriver, remove the three screws securing the mirror; at this stage, hold the outer body to avoid damaging the car body. Clean the contact area of the mirror, install the new mirror, and tighten the screws.

Reconnect the electrical wires and reassemble the electric mirror control in position. Check the proper operation of the new mirror.


Updated on 5 June 2026 by ScegliAuto


Related tutorials

Chevrolet Optra (2004-2013 / MK 1) In this very useful video guide today you will be able to see precisely all the diagrams of the two fuse boxes of a Chevrolet Optra, in the diagrams …
Chevrolet Optra (2004-2013 / MK 1) This guide shows how to replace the fuel pump on a Chevrolet Optra Mk1. First, lift the rear seat cushion and remove the inspection cover from the fu…
Chevrolet Optra (2004-2013 / MK 1) Below are the instructions for removing and replacing the fuel pump on the Chevrolet Optra. First, access the rear of the vehicle and remove the rear…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Hyundai i20

These brief instructions will show you how to reset the tyre pressure monitoring system (TPMS) light on the Hyundai i20. Before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get inside the cabin and turn on the ignition. Now, press and hold the TPMS reset button located on the left side of the driver's seat until the tyre pressure light resets on the instrument panel, as shown in the video. At this point, turn off the ignition and start the engine to complete the process!

Watch the video!


by ScegliAuto

More videos