Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Fuel Pump on the Chevrolet Optra

Model: Chevrolet Optra MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Fuel pump

Video tutorial

Below are the instructions for removing and replacing the fuel pump on the Chevrolet Optra. First, access the rear of the vehicle and remove the rear seat; take off the fuel pump cover and disconnect the fuel supply line, then disconnect the electrical connector for the fuel level sensor, as shown in the video.

At this point, unscrew the pump ring to remove it and replace it with the new one, as well as with the original; reassemble the pump and reconnect the various connections!


Updated on 5 September 2026 by ScegliAuto


Related tutorials

Chevrolet Optra (2004-2013 / MK 1) This guide shows how to replace the fuel pump on a Chevrolet Optra Mk1. First, lift the rear seat cushion and remove the inspection cover from the fu…
Chevrolet Optra (2004-2013 / MK 1) To replace the air filter in the Chevrolet Optra, open the hood to access the air filter box, located near the right front headlight, inside the engi…
Chevrolet Optra (2004-2013 / MK 1) As shown in this tutorial, replacing the cabin air filter on a Chevrolet Optra, also marketed as Daewoo Lacetti and Baojun 630, is a very simple and …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Hyundai i20

These brief instructions will show you how to reset the tyre pressure monitoring system (TPMS) light on the Hyundai i20. Before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get inside the cabin and turn on the ignition. Now, press and hold the TPMS reset button located on the left side of the driver's seat until the tyre pressure light resets on the instrument panel, as shown in the video. At this point, turn off the ignition and start the engine to complete the process!

Watch the video!


by ScegliAuto

More videos