Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the External Rear View Mirror from a Chevrolet Captiva

Model: Chevrolet Captiva MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Side mirror

See other generations:
Video tutorial

Below are the instructions on how to remove and replace the external rear view mirror of a Chevrolet Captiva. First, move to the side of the vehicle and begin by removing the small plastic cover located under the mirror; then unscrew the fastening screws found inside, disconnecting the electric connector for the mirror adjustment to finally remove the mirror.

At this point, carry out the repair or replacement of the rear view mirror, securing it properly and adjusting the glass.


Posted on 5 June 2026 by ScegliAuto


Related tutorials

Removing the Side Mirror on a Chevrolet Captiva
Removing the Side Mirror on a Chevrolet Captiva
Chevrolet Captiva (2006-2018 / MK 1) In this simple tutorial, you will see how to remove the external rear-view mirror on a Chevrolet Captiva. First, remove the plastic cover of the mirr…
How can the external rearview mirror of the Chevrolet Captiva be replaced?
How can the external rearview mirror of the Chevrolet Captiva be replaced?
Chevrolet Captiva (2006-2018 / MK 1) Following an accidental impact, it is highly likely that the reflective part of the rearview mirror of any car will break, necessitating replacement.…
How to Replace the Glass of the Wing Mirror on the Chevrolet Captiva
How to Replace the Glass of the Wing Mirror on the Chevrolet Captiva
Chevrolet Captiva (2006-2018 / MK 1) In this tutorial video, learn how to remove the glass from the left external wing mirror and replace it with a new one on the Chevrolet Captiva, as w…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos