Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Silverado
    4. : How to disassemble the rear speakers of the Chevrolet Silverado

Chevrolet Silverado - Video tutorial

Model: Chevrolet Silverado MK 2 - Years 2007-2014
Part: Loudspeaker
Operation: How to disassemble the rear speakers of the Chevrolet Silverado

Let's see in this short guide how to disassemble and replace the rear speakers of the Chevrolet Silverado, in simple and quick steps. First of all, we open the rear door of our car and start removing the rear door panel; to do this we unscrew the fixing screws that we find under the plastic covers, in order to detach and remove the panel, as shown in the video. At this point we use a socket wrench to unscrew the screws that we find on the sides of the speaker; we disconnect the electrical connector that we find on the back to remove it and replace the case with the new one!


Posted on 30 July 2022 by ScegliAuto



How to connect the smartphone to the Chevrolet Silverado
Chevrolet Silverado (2014-2018 / MK 3) To connect your smartphone to the Chevrolet Silverado radio quickly and above all correctly, all you have to do is put into practice the instructions
How to disassemble the rear seats in the Chevrolet Silverado pickup?
Chevrolet Silverado (2014-2018 / MK 3) In this tutorial we can see how to disassemble the rear seats in the Chevrolet Silverado pickup. First of all, open both rear doors, then identify th
How to replace the rear light of the Chevrolet Silverado?
Chevrolet Silverado (2014-2018 / MK 3) Replacing the rear light of the Chevrolet Silverado pick-up is a very simple and fast operation, let's see how to proceed in this tutorial. Let's sta

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos