Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Corvette
    4. : How to replace the clutch pedal spring on the Chevrolet Corvette C6

Chevrolet Corvette - Video tutorial

Model: Chevrolet Corvette C6 - Years 2005-2013
Part: Clutch
Operation: How to replace the clutch pedal spring on the Chevrolet Corvette C6

The guide shows you how to replace the Chevrolet Corvette C6 clutch pedal return spring. To perform this operation it is necessary to have a long nose pliers to facilitate the work. From the pedal board, remove the clip securing the caliper to the pedal by levering to release it. To remove the spring from the two lateral fixing points to the pedal, simply lever the spring until it comes out of the coupling point. To install the new spring, first insert the two ends into the lateral restraints and, after having pushed the pedal to the end of its travel, engage the restraint on the pedal lever. Check the correct functioning of the pedal.


Posted on 8 October 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos