Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Car Radio in a Chevrolet Sonic

Model: Chevrolet Sonic T300 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Car stereo

Video tutorial

To change the car radio in a Chevrolet Sonic, start by removing the outer trim panel by prying it off with a rounded pointed object. This operation exposes the mounting screws, which you can now easily remove.

Disconnect the plugs, leaving them hanging from the radio compartment. Take the new radio, already housed in its metal ISO bracket, and reconnect the plugs, ensuring they fit properly into their sockets.

Position any mounting brackets if the body of the new radio is smaller than the previous one, and reinsert the screws into their sockets, tightening them well. At this point, you can reposition the trim panel, pressing it into place with small taps.


Updated on 28 June 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb on a Chevrolet Sonic
How to Replace the Headlight Bulb on a Chevrolet Sonic
Chevrolet Sonic (2012-2020 / T300) The procedure to correctly replace the headlight bulb on your Chevrolet Sonic is fortunately very simple. With the following guide, you can complete …
How to Replace the Battery in a Chevrolet Sonic?
How to Replace the Battery in a Chevrolet Sonic?
Chevrolet Sonic (2012-2020 / T300) To replace the battery in a Chevrolet Sonic, open the hood to access the components inside the engine compartment. The battery is located near the le…
How to Replace the Cabin Air Filter in the Chevrolet Sonic
How to Replace the Cabin Air Filter in the Chevrolet Sonic
Chevrolet Sonic (2012-2020 / T300) In this new mini guide for your Chevrolet Sonic (2012-2020), we will describe step by step all the necessary steps to correctly complete the replacem…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos