Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Battery in a Chevrolet Traverse

Model: Chevrolet Traverse MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Battery

See other generations:
Video tutorial

If you need to replace the battery in this Traverse, refer to the instructions in this tutorial and the steps outlined below. The battery compartment in this vehicle is located under the floor in front of the passenger seat.

To access it, lift the mat; underneath, there is a panel secured with screws that you need to remove before lifting it. Underneath, you will find the battery compartment. Disconnect the negative terminal first, then the positive.

Remove the old battery and replace it with the new one, then reconnect the positive terminal first and then the negative, and close the plastic panel.


Updated on 4 July 2026 by ScegliAuto


Related tutorials

How to Replace the Battery in a Chevrolet Traverse?
How to Replace the Battery in a Chevrolet Traverse?
Chevrolet Traverse (2009-2017 / MK 1) To replace the battery in a Chevrolet Traverse, remove the carpet located in the rear of the cabin, directly in front of the right passenger seat. On…
How to Replace the Remote Battery in a Chevrolet Traverse?
How to Replace the Remote Battery in a Chevrolet Traverse?
Chevrolet Traverse (2018-2025 / MK 2) Replacing the remote battery in a Chevrolet Traverse is a simple and inexpensive task. Follow these steps in this tutorial. You won’t need any specia…
How to Replace the Remote Battery for the Chevrolet Traverse?
How to Replace the Remote Battery for the Chevrolet Traverse?
Chevrolet Traverse (2009-2017 / MK 1) Replacing the battery in the remote for the Chevrolet Traverse, as shown in this tutorial, is an extremely simple and quick task. To do this, you wil…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos