Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Cruze
    4. : How to factory reset chevrolet cruze radio

Chevrolet Cruze - Video tutorial

Model: Chevrolet Cruze J300, MK 1 - Years 2009-2015
Part: Car stereo
Operation: How to factory reset chevrolet cruze radio

If you are experiencing serious operating problems with the car radio in your Chevrolet Cruze then this guide will surely come in handy. In fact, thanks to the following manual reset procedure, you will be able to solve any software problem quickly and without cost. First, turn on the car ignition and the radio. Then click on the "Apps" icon and then on "Options". At this point select the "System" item and enter "Vehicle Settings". Locate the "Factory settings" box at the bottom right and press it. A few moments later the manual reset was completed successfully.


Posted on 22 May 2023 by ScegliAuto

    Frequently Asked Questions

    • Cruze 2009-2015 - Where can I find the Chevrolet Cruze radio unlock code? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos