Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to install LED bulbs in the front headlamp of a Chevrolet Spark

Model: Chevrolet Spark M300, MK 1 - Years 2009-2016
Part: Headlight bulb

This video tutorial demonstrates how to install LED bulbs (H4) in the front headlamp of a Chevrolet Spark by following a few simple steps. First, get inside the vehicle, turn off the engine, and pull the handbrake; lift the bonnet and secure it with the prop rod. Once you locate the halogen bulb to be replaced, disconnect the connector from the main unit, remove the protective rubber (which protects against dust and water), and loosen the retaining spring of the bulb. Remove the halogen bulb from its socket and then fit the new LED bulb, reconnecting all parts in reverse order.

Updated on 7 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulbs on the Chevrolet Spark?
How to replace the front headlight bulbs on the Chevrolet Spark?
Chevrolet Spark (2009-2016 / M300, MK 1) In this tutorial, see how to replace the front headlight bulbs on the Chevrolet Spark, a very simple and quick operation. First, ensure the key is no…
Replacing Headlight Bulbs on a Chevrolet Spark
Replacing Headlight Bulbs on a Chevrolet Spark
Chevrolet Spark (2009-2016 / M300, MK 1) Let’s see how to remove the damaged bulbs from the front headlight of a Chevrolet Spark. Lift the front bonnet and locate the caps at the back of the…
Replacement of the front headlight bulb of the Chevrolet Spark
Replacement of the front headlight bulb of the Chevrolet Spark
Chevrolet Spark (2009-2016 / M300, MK 1) Today, we will discover how to disassemble and replace the headlight bulb of the Chevrolet Spark. First, open the hood of the car and start removing …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos