Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Engine Oil Light of the Chevrolet Captiva

Model: Chevrolet Captiva MK 1 - Years 2006-2018
Part: Service warning light

If you have just changed the engine oil of your Chevrolet Captiva (2006-2018 model year) but the warning light continues to illuminate steadily at each start, you need to perform the following manual reset. First, go to the driver's side and start the instrument panel if you haven't already done so. Then, press the accelerator pedal fully three times in a row, and finally, turn off the panel. At this point, the reset is successfully completed, and to confirm, simply restart the panel. If there are any errors, you can easily repeat the entire procedure.

Updated on 9 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions to Reset Airbag Light on Chevrolet Captiva
Instructions to Reset Airbag Light on Chevrolet Captiva
Chevrolet Captiva (2006-2018 / MK 1) In this video tutorial, follow the main instructions on how to reset the airbag light on a Chevrolet Captiva in simple steps. Before resetting the li…
How to Reset the Service Light on the Chevrolet Captiva
How to Reset the Service Light on the Chevrolet Captiva
Chevrolet Captiva (2019-2026 / Cn202s) In this video, you will see how to reset the service light on the Chevrolet Captiva. There are two versions of this vehicle; the first produced until…
What does the oil warning light with a wrench indicate in the Chevrolet Captiva and how to remove it?
What does the oil warning light with a wrench indicate in the Chevrolet Captiva and how to remove it?
Chevrolet Captiva (2006-2018 / MK 1) If the oil light and a wrench light have turned on in the instrument panel of our Chevrolet Captiva, it means it is time to replace the oil as it has…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos