Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Aveo
    4. : How to replace the car radio in the Chevrolet Aveo

Chevrolet Aveo - Video tutorial

Model: Chevrolet Aveo MK 1, T200 - Years 2002-2011
Part: Car stereo
Operation: How to replace the car radio in the Chevrolet Aveo

Today's guide will show us how to disassemble and replace the original radio of the Chevrolet Aveo, following these simple steps. First, we get into the interior and start removing the two plastic covers on the sides of the radio, using thin levers. Then, we unscrew the fixing screws on the sides, as shown in the video. At this point, we disconnect the electrical wiring found at the back, removing and replacing the radio with the new one. If necessary, we make modifications to the wiring to adapt it to the new radio!


Posted on 15 September 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos