Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Open bonnet Chrysler, Dodge

Model: Chrysler Chrysler Various
Part: Body

In this video tutorial we will see how to open the engine hood on some Chrysler and Dodge models. First we go to pull the lever of the opening of the bonnet that we find inside the car, at the bottom of the driver's side and under the steering wheel; at this point let's move to the hood of the car and insert our hand inside the slot where we will release our lever and press it, as shown in the video. We raise the bonnet and we go to block it with our rod to put it in the safety position. Once finished, let's close it again, letting it fall.

Posted on 12 November 2020 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the water pump Fiat, Chrysler, Dodge, MultiAir engine
Disassembly of the water pump Fiat, Chrysler, Dodge, MultiAir engine
Chrysler Chrysler Various In this video we will see how to disassemble the water pump on various models of Fiat, Chrysler and Dodge with MultiAir engines. In this video we wil…
Where is the fuse box located in the Chrysler Neon?
Where is the fuse box located in the Chrysler Neon?
Chrysler Chrysler Various If you own a Chrysler Neon (year 2000-2005) and want to find out where the box containing the car's fuses is located, then all you have to do is read…
Airbag light reset on Jeep, Fiat, Dodge and Chrysler cars
Airbag light reset on Jeep, Fiat, Dodge and Chrysler cars
Chrysler Chrysler Various In this tutorial we will show you a method to reset the airbag warning light but we still recommend taking the car to the workshop to check that ther…

Other guides you may be interested in

How to Replace the Rear Wheel Bearing on Peugeot 407

How to remove a rear wheel bearing along with all associated parts on a Peugeot 407? Position your car on a column lift, loosen the bolts with a socket wrench and raise it to a comfortable height. Unscrew the bolts and remove the wheel, then start unscrewing the bolts of the brake caliper to detach it from the bracket. Use a socket to loosen the caliper bolt. Now remove the caliper bracket and unscrew the bolts on the brake disc, pulling the disc towards you to slide it off the wheel hub. Completely remove the wheel hub from the car's arm and extract the worn bearing. Using a pressing tool, fit the new bearing. Before reassembling everything, clean all dirt and debris from the disassembled parts with brushes and lubricate the components. Refit the brake disc with all associated bolts.

Watch the video!


by ScegliAuto

More videos