Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Knob on a Chrysler 300

Model: Chrysler 300c MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Shift knob

See other generations:
Video tutorial

To replace the gear knob on a Chrysler 300, use a tool to pry off the chrome ring at the base of the knob. Once removed, you can detach the clip located underneath that secures the knob to the gear lever.

After this is released, pull the knob off the top of the lever; this will allow you to fit the new one and secure it to the clip, reattaching the chrome ring at the base of the knob.


Updated on 20 July 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Light on the Chrysler 300
How to Reset the Oil Light on the Chrysler 300
Chrysler 300c (2011-2023 / LD, MK 2) If you own a second-generation Chrysler 300 and want to know the steps to manually reset the engine oil light, pay attention to the following instruc…
Removing the Interior Light Fitting on a Chrysler 300
Removing the Interior Light Fitting on a Chrysler 300
Chrysler 300c (2004-2011 / MK 1) Are the bulbs in the interior light fitting blown? Here’s how to remove the light fitting from a Chrysler 300. Using a screwdriver or a plastic lever…
How to replace the door lock on the Chrysler 300?
How to replace the door lock on the Chrysler 300?
Chrysler 300c (2004-2011 / MK 1) To replace the door lock on the Chrysler 300, loosen the screws securing the door from the bottom, along with the corresponding rivets. Once all thes…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos