Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the interior light bulbs of the Citroen C4 Picasso.

Model: Citroen C4 Picasso MK 2 - Years 2013-2022
Part: Interior dome light bulb

The brief instructions provided in this guide will show us how to dismantle and replace the interior light fixture of the Citroen C4 Picasso. First, we get inside the vehicle and start prying on the side of the light fixture to detach and remove it, disconnecting the electrical connector of the bulbs; then we remove the bulb holder and replace any faulty small bulbs with new ones, as shown in the video. At this point, we reassemble the interior light fixture and connect it, checking its functionality!

Posted on 1 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the interior light bulb of the Citroen C4 Picasso
How to replace the interior light bulb of the Citroen C4 Picasso
Citroen C4 Picasso (2006-2013 / MK 1) Replacing the bulb of the interior lights ceiling fixture of the Citroen C4 Picasso is a very simple operation to perform independently. The first th…
Replacement of the interior light fixture of the Citroen C4 Picasso.
Replacement of the interior light fixture of the Citroen C4 Picasso.
Citroen C4 Picasso (2013-2022 / MK 2) These short and simple steps will show us how to disassemble and replace the interior light fixture of the Citroen C4 Picasso. First, we climb aboard…
Replacement of the front headlight bulb of the Citroen C4 Picasso.
Replacement of the front headlight bulb of the Citroen C4 Picasso.
Citroen C4 Picasso (2006-2013 / MK 1) Today's instructions will allow us to disassemble and replace the low beam bulb of the front headlight of the Citroen C4 Picasso. First, let's open t…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos