Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Number Plate Light on a Citroen C3 Picasso

Model: Citroen C3 Picasso MK 1 - Years 2008-2017
Part: License plate light

Is replacing the number plate light on a Citroen C3 Picasso a complicated task? Let's see in this video how to replace the damaged bulb. Open the boot lid, then unscrew the screws on the plastic trim of the tailgate using a screwdriver. Detach the plastic trim from the tailgate, then unscrew the fixing pins (located between the tailgate metal and the external chrome profile) of the chrome bar with a screwdriver. Finally, disconnect the power connector of the number plate light and detach it from the tailgate using a plastic lever. Once the light unit is removed, extract the bulb with your fingers. Install the new bulb (same size and voltage) into the bulb holder, and reassemble the light unit into the tailgate metal. Finally, test the correct operation of the previously installed bulb.

Updated on 28 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Diesel Filter on a Citroen C3 Picasso?
How to Replace the Diesel Filter on a Citroen C3 Picasso?
Citroen C3 Picasso (2008-2017 / MK 1) In this tutorial, you will see how to replace the diesel filter on a Citroen C3 Picasso, a very simple and quick operation. First, ensure that the en…
Replace the Gear Knob on the Citroen C3 Picasso
Citroen C3 Picasso (2008-2017 / MK 1) In this video tutorial, you will see the instructions for removing and replacing the gear knob on the 2009 Citroen C3 Picasso in simple and quick ste…
How to replace the side turn signal bulb of the Citroen C3 Picasso
How to replace the side turn signal bulb of the Citroen C3 Picasso
Citroen C3 Picasso (2008-2017 / MK 1) The following video tutorial shows us how to replace the side indicator light bulb on a Citroen C3 Picasso vehicle easily and quickly. To perform thi…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos