Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Dipped Beam Bulb on a Citroen Berlingo MK2

Model: Citroen Berlingo MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight bulb

See other generations:
Video tutorial

Driving with non-functioning dipped beam lights is dangerous and puts you at risk of fines, so when you notice a burnt-out bulb, replace it as soon as possible. Open the bonnet, stand in front of the headlamp with the burnt bulb, and access the rear of the headlight.

Remove the plastic cover behind the bulb by turning it, then disconnect the electrical connector. Release the metal clip that holds the old bulb in place, remove it, and insert a new H4 bulb into the housing.

Secure it with the clip, reconnect the electrical connector, and reposition the cover.


Updated on 10 November 2026 by ScegliAuto


Related tutorials

Citroen Berlingo (2008-2018 / MK 2) In this short video, learn how to remove and replace the headlight bulbs on the Citroen Berlingo second series, following the instructions below. Fir…
Citroen Berlingo (2008-2018 / MK 2) Are the front headlight bulbs blown? Here's how to replace them on a Peugeot Berlingo. Open the front bonnet by pulling the lever located at the bott…
Citroen Berlingo (2008-2018 / MK 2) In this tutorial we can see how to replace the rear headlight bulbs in the Citroen Berlingo, an extremely simple and quick operation. First of all, m…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos