Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlights bulbs in the Citroen Berlingo?

Model: Citroen Berlingo MK 2 - Years 2008-2018
Part: Tail light bulb

In this tutorial we can see how to replace the rear headlight bulbs in the Citroen Berlingo, an extremely simple and quick operation. First of all, make sure that the key is not inserted, so that you can work safely, then open the rear door, locate the two bolts along the inner edge of the headlight in question and unscrew them using a Torx T30 key. Then grip the headlight, pull it towards you and separate it from the bodywork. At this point, we can disconnect the power connector, open the inner cap and replace the faulty bulb.

Posted on 3 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Headlight Bulbs on the Citroen Berlingo 2
How to Change the Headlight Bulbs on the Citroen Berlingo 2
Citroen Berlingo (2008-2018 / MK 2) In this short video, learn how to remove and replace the headlight bulbs on the Citroen Berlingo second series, following the instructions below. Fir…
Replacing Headlight Bulbs on Citroen Berlingo
Replacing Headlight Bulbs on Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Are the front headlight bulbs blown? Here's how to replace them on a Peugeot Berlingo. Open the front bonnet by pulling the lever located at the bott…
Where are the fuses of the Citroën Berlingo located?
Citroen Berlingo (2018-2026 / MK 3) Every fuse in the Citroën Berlingo is located inside one of the special fuse boxes that are installed on the vehicle: in this type of vehicle it will…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos