Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Berlingo
    4. : How to replace the rear light bulbs in Citroen Berlingo?

Citroen Berlingo - Video tutorial

Model: Citroen Berlingo MK 2 - Years 2008-2018
Part: Rear light bulb
Operation: How to replace the rear light bulbs in Citroen Berlingo?

As we can see in this tutorial, changing the rear light bulbs in your Citroen Berlingo is an extremely simple and fast operation. First of all, make sure that the key is not inserted, then open the tailgate, locate the bolts located along the internal edge of the light in question and unscrew them using a Torx T20 screwdriver. Then grab the lighthouse, pull it outwards and separate it from the bodywork. At this point we can disconnect the power connector, unlock the internal plate and replace the faulty bulb.


Posted on 11 April 2023 by ScegliAuto



How to replace rear light bulbs on Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Let's see in this short and simple guide the steps necessary to disassemble and replace the rear light bulbs of the Citroen Berlingo. First of all, o
How to replace the rear light bulbs on a Citoren Berlingo
Citroen Berlingo (2008-2018 / MK 2) Are the bulbs in the rear light of your Berlingo gone? Let's see in this video how to replace the rear light bulbs. We open the hood of the luggage c
Replacement headlight bulbs on Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) We replace the burnt out bulbs in the headlights of our Citroen Berlingo. Let's see how the bulbs are changed. We open the hood of the front compartm

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos