Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear lights in the Citroen Berlingo?

Model: Citroen Berlingo MK 2 - Years 2008-2018
Part: Tail light

In this tutorial we can see how to remove the rear lights on the Citroen Berlingo, an extremely simple and quick operation. First of all, make sure that the key is not inserted, then open the tailgate, locate the bolts along the inner edge of the light in question and unscrew them using a Torx key. Next, grab the light, pull it towards you and separate it from the bodywork. At this point, all that remains is to disconnect the power connector, transfer the bulbs to the replacement, if necessary, and mount it following the reverse procedure.

Posted on 26 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the rear lights in the Citroen Berlingo?
How to disassemble the rear lights in the Citroen Berlingo?
Citroen Berlingo (2008-2018 / MK 2) .. In this tutorial, we can see how to disassemble the rear lights in the Citroen Berlingo, an extremely simple and quick operation,.. …
How to disassemble the rear lights in the Citroen Berlingo van?
How to disassemble the rear lights in the Citroen Berlingo van?
Citroen Berlingo (1996-2013 / MK 1) .. In this tutorial, we can see how to disassemble the rear lights in the Citroen Berlingo van, an extremely simple and quick operation... …
How to Change the Headlight Bulbs on the Citroen Berlingo 2
How to Change the Headlight Bulbs on the Citroen Berlingo 2
Citroen Berlingo (2008-2018 / MK 2) In this short video, learn how to remove and replace the headlight bulbs on the Citroen Berlingo second series, following the instructions below. Fir…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos