Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulbs of a Citroën Berlingo

Model: Citroen Berlingo MK 2 - Years 2008-2018
Part: Tail light bulb

Are the bulbs in the rear light of your Berlingo faulty? Follow this guide to replace the rear light bulbs. Open the boot lid, unscrew the securing screws on the side of the rear light (top and side); prepare to detach the rear light (as shown in the video). Disconnect the bulb holders from the light, replace the damaged bulbs with new ones (voltage and size must match the original). Finally, reassemble the rear light: screw in the securing pins of the light (as previously unscrewed). Test the correct operation of the lights.

Updated on 10 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Headlight Bulbs on Citroen Berlingo
Replacing Headlight Bulbs on Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Are the front headlight bulbs blown? Here's how to replace them on a Peugeot Berlingo. Open the front bonnet by pulling the lever located at the bott…
Replacing the Rear Light of a Citroen Berlingo
Replacing the Rear Light of a Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) Is the light on your car broken and needs replacing? Let's look at removing the rear light of a Citroen Berlingo. Open and lift the tailgate of the l…
Replacing Front Headlight Bulbs on Citroen Berlingo
Replacing Front Headlight Bulbs on Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Replace the blown bulbs in the front lights of your Citroen Berlingo. Start by opening the front bonnet and removing the plastic cover (if fitted beh…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos