Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Berlingo
    4. : How to replace a rear light on Citroen Berlingo

Citroen Berlingo - Video tutorial

Model: Citroen Berlingo MK 2 - Years 2008-2018
Part: Tail light
Operation: How to replace a rear light on Citroen Berlingo

Do we want to remove the rear light of the Berlingo? Let's see how to remove the rear light of the Citroen. We open the hood of the luggage compartment, we identify the plastics of the rear light. Using a screwdriver, unscrew the tightening screws placed on the side of the headlight (right), detach the rear light from its housing once all the screws have been removed (remove the power supply terminals). Once the rear light is removed, we replace the damaged bulbs with new ones (same size and voltage). Finally we go to reassemble the lighthouse with attached screws and reconnect the power supply terminals. We turn on the headlights for a test.


Posted on 9 February 2024 by ScegliAuto



How to replace rear light bulbs on Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Let's see in this short and simple guide the steps necessary to disassemble and replace the rear light bulbs of the Citroen Berlingo. First of all, o
How to replace the rear light bulbs in Citroen Berlingo?
Citroen Berlingo (2008-2018 / MK 2) As we can see in this tutorial, changing the rear light bulbs in your Citroen Berlingo is an extremely simple and fast operation. First of all, make
How to replace the license plate light of the Citroen Berlingo.
Citroen Berlingo (1996-2013 / MK 1) If you own a Citroen Berlingo and want to learn how to properly replace the license plate light, all you have to do is follow the steps described in

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos