Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulbs of the Citroen Berlingo

Model: Citroen Berlingo MK 2 - Years 2008-2018
Part: Tail light bulb

In this brief and simple guide, follow the necessary steps to disassemble and replace the bulbs of the rear light of the Citroen Berlingo. First, open the rear tailgate and start unscrewing the two fixing screws located on the side; then disconnect the electrical connector of the bulbs found at the back, as shown in the video. At this point, detach the light unit to separate it from the bulb holder, gaining access to all the bulbs; replace any faulty bulbs with new ones, applying the reverse procedure for reassembly!

Updated on 1 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Headlight Bulbs on Citroen Berlingo
Replacing Headlight Bulbs on Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Are the front headlight bulbs blown? Here's how to replace them on a Peugeot Berlingo. Open the front bonnet by pulling the lever located at the bott…
Replacing Front Headlight Bulbs on Citroen Berlingo
Replacing Front Headlight Bulbs on Citroen Berlingo
Citroen Berlingo (2008-2018 / MK 2) Replace the blown bulbs in the front lights of your Citroen Berlingo. Start by opening the front bonnet and removing the plastic cover (if fitted beh…
Replacing the Rear Light of a Citroen Berlingo
Replacing the Rear Light of a Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) Is the light on your car broken and needs replacing? Let's look at removing the rear light of a Citroen Berlingo. Open and lift the tailgate of the l…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos