Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Nemo
    4. : How to disassemble the mirror of the exterior mirror Citroen Nemo

Citroen Nemo - Video tutorial

Model: Citroen Nemo MK 1 - Years 2007-2017
Part: Outside rearview mirror
Operation: How to disassemble the mirror of the exterior mirror Citroen Nemo

How to disassemble the mirror of the rearview mirror Citroen Nemo? Let's see in this video how to proceed. With a lever with a plastic or rubber coating, we go to pry between the perimeter of the mirror frame and the mirror glass of the same. We pry until the slide comes off the mirror; very delicate operation because the mirror or the mirror itself could break. Once the damaged mirror glass has been removed, disconnect the glass power supply terminal, press the locking clips to disconnect the mirror cover. Finally we can replace the damaged part with the new one. We are careful to engage the plastic snap clips in the mirror supports.


Posted on 16 October 2023 by ScegliAuto

This video is currently unavailable

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos