Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the steering head of the Citroen Berlingo II.

Model: Citroen Berlingo MK 2 - Years 2008-2018
Part: Electric power steering motor

In this video, we will see how to replace the steering head of the Citroen Berlingo II: we will need to lift the front part of the vehicle and remove the wheels; once this is done, we can access the steering head. We will need to clean the components with a wire brush and some penetrating oil: we will need to make a mark with a marker between the tie rod and the steering head, as it will be useful for reassembly. Now, we unscrew the sealing screw and with the help of a hammer, detach the screw from the pin, then unscrew the steering head, counting the number of turns required to do so. We examine the distance between the lock nut and the tie rod, so that we can put the lock nut back at the same distance, and then put the steering head back in place, making the same number of turns that were needed to unscrew it. We put the steering head back on the pin and tighten the new nut to 35 Nm. We screw the nut back on the tie rod side and reassemble the wheel. We can also lower the vehicle: job done.

Posted on 3 February 2025 by ScegliAuto

Video tutorial

Related tutorials

Citroen Berlingo (2008-2018 / MK 2) In the Citroen Berlingo, as with all other cars, the fuse box layouts are present on their covers, usually engraved on the cover, in the user manual,…
Citroen Berlingo (2008-2018 / MK 2) Here's how to remove the steering wheel of a Citroen Berlingo: first, disconnect the negative battery terminal, as we need to remove the airbag and d…
Citroen Berlingo (2008-2018 / MK 2) This video guide is very useful for those who decide to disassemble the steering wheel airbag of a Citroen Berlingo themselves. As you can see, the s…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos