Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the external rearview mirror of the Citroen C3

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Side mirror

In a few simple steps, we will see how to disassemble and replace the external rearview mirror of the Citroen C3. First, open the front door of the car and start disassembling and removing the door panel; remove the triangular plastic cover of the mirror and unscrew the fixing screws found on the back, as shown in the video. Now disconnect the electrical connector for the glass adjustment to remove the mirror from the outside, replacing it with the new one; in the same way, it will be possible to replace the other mirror too!

Posted on 5 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Adjust the Driver's Side Wing Mirror on Our Citroen C3
How to Adjust the Driver's Side Wing Mirror on Our Citroen C3
Citroen C3 (2002-2009 / FC, FN) Before you can start, head to your Citroen C3, then enter the cabin and sit in the driver's seat. The lever that adjusts the driver's side wing mirro…
How to replace the external rearview mirror of the Citroen C3
How to replace the external rearview mirror of the Citroen C3
Citroen C3 (2009-2016 / SC) Below we will discover the instructions that will allow us to disassemble and replace the external rearview mirror of the Citroen C3. First, we open …
How to Remove the External Wing Mirror on the Citroen C3
How to Remove the External Wing Mirror on the Citroen C3
Citroen C3 (2016-2023 / SY, SX) This guide provides instructions to remove and replace the external wing mirror on the Citroen C3. First, open the front door and start by removing t…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos