Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rearview mirror of the Citroen Jumpy

Model: Citroen Jumpy MK 3 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Side mirror

See other generations:
Video tutorial

In this video we can see how it is possible to disassemble the external rearview mirror of the Citroen Jumpy: it is necessary to at least loosen the internal lining of the door, in order to remove the internal lining of the pillar and the entire front frame of the door itself (which is only snapped on): in fact, that's where we can remove the mirror.

Once this lining is removed, we expose holes in the bodywork that allow us to insert the screwdriver inside and unscrew the plate with the entire mirror from the outside, pulling away the electrical connector.

To put everything back in place, all we have to do is follow the entire procedure in reverse: we put the electrical connector back in place, screw the plate back on, and reassemble the plastic internal frame. Now we can put the internal lining of the door back in place and the job is done.


Posted on 5 February 2025 by ScegliAuto


Related tutorials

How to Replace the Air Filter in a Citroen Jumpy 3?
How to Replace the Air Filter in a Citroen Jumpy 3?
Citroen Jumpy (2016-2026 / MK 3) In the following guide, find the description of all the steps to correctly replace the engine air filter in your Citroen Jumpy Mk3. Before starting, …
Position and use of the EGR valve on the Citroen Jumpy
Position and use of the EGR valve on the Citroen Jumpy
Citroen Jumpy (2016-2026 / MK 3) In this video, we see where the EGR valve of the Citroen Jumpy is located: it is an essential component for reducing nitrogen oxide emissions in dies…
How to Replace the Diesel Filter on a Citroen Jumpy
How to Replace the Diesel Filter on a Citroen Jumpy
Citroen Jumpy (1994-2007 / MK 1) Before you can start, open the bonnet of your Citroen Jumpy. First, disconnect and move the hoses connected to the diesel filter by loosening the res…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos