Do it yourself
Frequently asked questions about cars and motorcycles

What to do when the Citroen C4 Grand Picasso signals a problem with the AdBlue

Model: Citroen C4 Picasso MK 2 - Years 2013-2022
Part: AdBlue warning light

In this video, we see how to behave when the AdBlue warning light appears on the dashboard of the Citroen C4 Grand Picasso: this means that we will need to refill the additive tank with AdBlue, or the vehicle will stop after a certain number of kilometers (or miles, as is the case in the video) and then we will be forced to do a reset at the workshop. We recommend not letting the additive refill reach zero or almost zero, as this can be dangerous. Use only high-quality additive, and make sure it has not been stored in direct sunlight, which could damage it. Insert the nozzle, located under the label, and then go to the tank cap, which in the seven-seat version is located under the right seat of the third row; after refilling, we can start the vehicle and see that the warning light has turned off; in fact, it does not require any reset operation.

Posted on 24 February 2025 by ScegliAuto

Video tutorial

Related tutorials

Citroen C4 Picasso (2013-2022 / MK 2) In this video, we see the problem of a Citroen C4 Grand Picasso, which has a common issue with these vehicles: with the Start & Stop activated, when …
Citroen C4 Picasso (2013-2022 / MK 2) If the AdBlue warning light has illuminated on the dashboard of your Citroen C4 Grand Picasso, it means that the emissions fluid has dropped to a too…
Citroen C4 Picasso (2013-2022 / MK 2) If the AdBlue light has come on in your Citroen C4 Grand Picasso, it means that a low level of the anti-pollution fluid has been detected, which need…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos