Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the AdBlue Warning Light on the Citroen C4 Picasso 1.6 BlueHDi

Model: Citroen C4 Picasso MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: AdBlue warning light

See other generations:
Video tutorial

Briefly, we will see the instructions that will allow us to reset the AdBlue refill warning light on the Citroen C4 Picasso 1.6 BlueHDi. First, open the rear hatch of the boot and start removing the shelf to access the AdBlue tank cap located below (next to the spare wheel); then refill using the appropriate canister or directly at the pump, as shown in the video.

Now, get into the vehicle and turn on the ignition, checking the AdBlue level and waiting for the warning light to reset.


Posted on 17 August 2026 by ScegliAuto


Related tutorials

How to Add AdBlue and Reset the Emissions Light on Citroen C4 Picasso BlueHDi
How to Add AdBlue and Reset the Emissions Light on Citroen C4 Picasso BlueHDi
Citroen C4 Picasso (2013-2022 / MK 2) In this video, see how to add AdBlue to reset the emissions warning on a second series Citroen C4 Picasso with a BlueHDi engine. First, obtain some A…
How to Reset the AdBlue Light on a Citroen C4 Grand Picasso?
How to Reset the AdBlue Light on a Citroen C4 Grand Picasso?
Citroen C4 Picasso (2013-2022 / MK 2) If the AdBlue light has come on in your Citroen C4 Grand Picasso, it means that a low level of the anti-pollution fluid has been detected, which need…
How to Replace the Fuel Filter on the Citroen C4 Picasso 2.0 BlueHDi
How to Replace the Fuel Filter on the Citroen C4 Picasso 2.0 BlueHDi
Citroen C4 Picasso (2013-2022 / MK 2) Let’s discover the instructions that will allow us to remove and replace the fuel filter on the Citroen C4 Picasso 2.0 BlueHDi. First, open the bonne…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos