Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the rear door panel of the Citroen C3 MK1?

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Door trim panel

In this video, we can see how to disassemble the rear door panel of the Citroen C3 MK1. First, using a plastic spatula, we remove the cover of the handle; underneath it we find two torx screws, which can be easily removed. To remove the window handle, simply pull towards us with force - after this, it will be enough to lever around the panel with a plastic lever, starting from the bottom, in order to remove the clips that support the panel around its perimeter. Gently detach it, and lean it against a wall. In this case, there are no electrical connectors to disconnect inside.

Posted on 5 March 2025 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the rear door panel Citroen C3
Disassembly of the rear door panel Citroen C3
Citroen C3 (2009-2016 / SC) In this video we see how to disassemble the rear door panel of a Citroen C3; we will need to remove the window handle and then the door handle, from …
Removing the Door Panel on a Citroen C3
Removing the Door Panel on a Citroen C3
Citroen C3 (2002-2009 / FC, FN) Need to remove the door panel on a Citroen C3? Here’s how to do it. Remove the handle cover, unscrew the screws located in the space of the upper han…
Remove the Right Rear Door Panel on a Citroen C3
Remove the Right Rear Door Panel on a Citroen C3
Citroen C3 (2002-2009 / FC, FN) How do you remove the right side rear door panel on a Citroen C3? Follow these steps. Before starting the disassembly, disconnect the battery termina…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos