Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the rear door panel Citroen C3

Model: Citroen C3 SC - Years 2009-2016
Part: Car door

In this video we see how to disassemble the rear door panel of a Citroen C3; we will need to remove the window handle and then the door handle, from which we will remove the two screws fixing the panel to the metal part of the door; they are the only metal supports to which the panel is anchored to the door, so it will be enough to lever from the sides or from below, to detach the plastic supports that anchor the panel along its perimeter. Let's be careful not to break them, especially if the car is quite old (they can be rather fragile because they are cooked by the sun and time), and now we can access the outside of the door.

Posted on 22 April 2024 by ScegliAuto

Video tutorial

Related tutorials

Remove the Right Rear Door Panel on a Citroen C3
Remove the Right Rear Door Panel on a Citroen C3
Citroen C3 (2002-2009 / FC, FN) How do you remove the right side rear door panel on a Citroen C3? Follow these steps. Before starting the disassembly, disconnect the battery termina…
Removing the Door Panel on a Citroen C3
Removing the Door Panel on a Citroen C3
Citroen C3 (2002-2009 / FC, FN) Need to remove the door panel on a Citroen C3? Here’s how to do it. Remove the handle cover, unscrew the screws located in the space of the upper han…
How to Remove the Door Panel on a Citroen C3
How to Remove the Door Panel on a Citroen C3
Citroen C3 (2002-2009 / FC, FN) How to remove the door panel on a Citroen C3? In this guide, we will see how to proceed with the disassembly. Before starting, disconnect the battery…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos