Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C3
    4. : Remove the right rear door panel on a Citroen c3

Citroen C3 - Video tutorial

Model: Citroen C3 FN, FC - Years 2002-2009
Part: Door panel
Operation: Remove the right rear door panel on a Citroen c3

How do we go to remove the rear right side door panel on a Citroen c3? Let's see how to proceed together in this video. Before starting the disassembly work, let's disconnect the battery terminals in the engine compartment. Let's start the disassembly: remove the frame of the door opening lever with a lever, then, with a screwdriver, unscrew the fastening screws placed on the plastic panel. Once all the screws have been removed, with the lever remove the window lifter button (if not present, the crank), remove all the plastic clips that block the door. We detach the door panel with our hands, unhook any power supply terminals and release cable. We carry out the necessary maintenance in the door.


Posted on 14 October 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos