Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Window Switch from the Citroen C3

Model: Citroen C3 SC - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Window switch

See other generations:
Video tutorial

Removing the window switch in case of a fault on a Citroen C3 follows a rather simple procedure, which can be done independently, aided by our short video tutorial illustrating the steps to take. First, open the door where the switch needs to be removed, then use a flathead screwdriver to pry the button from its housing.

Insert the screwdriver inside and lever it outwards; once removed from its housing, simply disconnect it from the vehicle by removing the connector. To install a new switch, first connect it to the connector and then insert it into its housing by pushing it in.


Updated on 23 August 2026 by ScegliAuto


Related tutorials

How to Replace the Window Regulator Motor in a Citroen C3
How to Replace the Window Regulator Motor in a Citroen C3
Citroen C3 (2009-2016 / SC) To replace the window regulator motor in the Citroen C3, first remove the plastic cover from the handle; then unscrew the screws inside the handle. O…
How to Replace the Side Window on a Citroen C3?
How to Replace the Side Window on a Citroen C3?
Citroen C3 (2002-2009 / FC, FN) The vehicle we will discuss is the Citroen C3. If you need to replace the door glass, you can do it yourself by following a standard procedure for th…
How to Remove the Rear Window on a Citroen C3?
How to Remove the Rear Window on a Citroen C3?
Citroen C3 (2002-2009 / FC, FN) In this tutorial, you will see how to remove the rear window on a Citroen C3. For this operation, you will need a T25 Torx key and a set of screwdriv…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos