Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you top up the coolant in the Citroën C3 AirCross?

Model: Citroen C3 Aircross MK 1 - Years 2017-2024
Part: Antifreeze coolant

In order to top up the coolant of the Citroën C3 AirCross, you will need to open the hood so that you can access the components located inside the engine compartment: here you will be able to locate the tank containing the liquid on the left side. By opening the tank, you will be able to add the necessary amount of liquid until the tank is completely filled; once the top-up is done, you can close the hood and then go inside the cabin, turning on the instrument panel and making sure there are no warning lights on.

Posted on 6 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Fold Down the Rear Seat of a Citroen C3 Aircross
How to Fold Down the Rear Seat of a Citroen C3 Aircross
Citroen C3 Aircross (2017-2024 / MK 1) Before you can start, open the rear door of your Citroen C3 Aircross. Begin by pulling towards you the latch located at the lower outer corner of the…
Where is the fuse box of the Citroen C3 Aircross 2020 located?
Where is the fuse box of the Citroen C3 Aircross 2020 located?
Citroen C3 Aircross (2017-2024 / MK 1) If you own a 2020 Citroen C3 Aircross and want to find out where the box containing all the various fuses of the car is located, then all you have to…
How do you replace the cabin filter of the Citroën C3 AirCross?
How do you replace the cabin filter of the Citroën C3 AirCross?
Citroen C3 Aircross (2017-2024 / MK 1) To replace the cabin filter of the Citroën C3 Aircross, you need to open the hood so that you can access the engine compartment: in its rear part, ju…

How to Reset the AdBlue Warning Light on the Peugeot 3008 1.5 BlueHDi

Today, we will see in this brief guide the procedure necessary to reset the AdBlue warning light on the Peugeot 3008 1.5 BlueHDi. Before resetting the AdBlue light, ensure that the correct level of fluid has been restored; then get in the vehicle and connect your diagnostic software, as shown in the video. At this point, navigate to the fault resolution or AdBlue reset option to perform the reset; wait for the countdown to complete to finish the reset operation!

Watch the video!


by ScegliAuto

More videos