Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear fog lights in the Citroen C4 Picasso?

Model: Citroen C4 Picasso MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Fog lights

See other generations:
Video tutorial

In this tutorial we can see how to disassemble the rear fog lights in the Citroen C4 Picasso, an extremely simple and quick operation. First of all, make sure that the key is not inserted, then go to the back of the vehicle, locate the two screws on the lower edge of the headlight in question and unscrew them using a Torx T20 key. Then grab the headlight, separate it from the bumper and disconnect the power connector.

At this point, all that remains is to replace the damaged element, reassemble everything and repeat the operation on the opposite side, if necessary.


Posted on 16 April 2025 by ScegliAuto


Related tutorials

How do you replace a light bulb in the Citroen C4 Picasso?
How do you replace a light bulb in the Citroen C4 Picasso?
Citroen C4 Picasso (2006-2013 / MK 1) It is important to keep all the bulbs of the headlights, both front and rear, of your car efficient. Let's go into detail about the Citroen C4 Picass…
How to Replace the Front Fog Light Bulb on a Citroen C4 Grand Picasso
How to Replace the Front Fog Light Bulb on a Citroen C4 Grand Picasso
Citroen C4 Picasso (2013-2022 / MK 2) These brief steps will show you how to remove and replace the front fog light bulb on a Citroen C4 Picasso and C4 Grand Picasso. First, move to the f…
How to remove the rear lights in the Citroen C4 Picasso?
How to remove the rear lights in the Citroen C4 Picasso?
Citroen C4 Picasso (2013-2022 / MK 2) In this tutorial we can see how to disassemble the rear lights in the Citroen C4 Picasso, an extremely simple and fast operation. First of all, make …

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos