Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear lights in the Citroen C4 Picasso?

Model: Citroen C4 Picasso MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Tail light

See other generations:
Video tutorial

In this tutorial we can see how to disassemble the rear lights in the Citroen C4 Picasso, an extremely simple and fast operation. First of all, make sure that the key is not inserted, so that you can operate safely, then open the trunk door and remove the panel located on the back of the headlight in question.

Next, unscrew the three bolts indicated using a Torx T30 key, disconnect the power connector, and, pulling it outwards, separate the headlight from the bodywork. At this point, all that remains is to replace the faulty element and reassemble everything following the reverse procedure.


Posted on 4 February 2025 by ScegliAuto


Related tutorials

How to remove the rear fog lights in the Citroen C4 Picasso?
How to remove the rear fog lights in the Citroen C4 Picasso?
Citroen C4 Picasso (2006-2013 / MK 1) In this tutorial we can see how to disassemble the rear fog lights in the Citroen C4 Picasso, an extremely simple and quick operation. First of all, …
How to replace the rear headlight bulbs in the Citroen C4 Picasso?
How to replace the rear headlight bulbs in the Citroen C4 Picasso?
Citroen C4 Picasso (2006-2013 / MK 1) In this tutorial we can see how to replace the rear headlight bulbs in the Citroen C4 Picasso, a very simple and quick operation. First of all, make …
How to replace the rear light bulbs in the Citroen C4 Picasso?
How to replace the rear light bulbs in the Citroen C4 Picasso?
Citroen C4 Picasso (2013-2022 / MK 2) In this tutorial, we will see how to replace the rear light bulbs in the Citroen C4 Picasso, a very simple and quick operation. First, ensure that th…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos