Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the light bulb in a Citroen Jumper

Model: Citroen Jumper MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Light bulb

See other generations:
Video tutorial

In this video, we see how to change the light bulb of a Citroen Jumper van: unfortunately, on these vehicles it is not possible to simply open the hood, reach behind the headlight unit and remove the rubber cap to change the light bulb. The space is really tight and, if you don't have very small hands, this operation is not possible.

It is therefore necessary to remove the entire headlight unit in order to change a simple bulb. In reality, it is not a complex operation, as the headlight is supported by two clearly visible bolts on the sides, connected to the body, which are easily removed.

The only precaution is to carefully lift up the headlight, and then to carefully place it back, sliding it downwards when reconnecting it.


Posted on 25 April 2025 by ScegliAuto


Related tutorials

How to change the low beam headlight bulb of a Citroen Jumper
How to change the low beam headlight bulb of a Citroen Jumper
Citroen Jumper (2014-2024 / MK 3) Today we will see how to change the dipped beam bulb of a Citroen Jumper mk3. So let's start the procedure by removing the body parts that hide the h…
How to change the headlight bulb of a Citroen Jumper
How to change the headlight bulb of a Citroen Jumper
Citroen Jumper (2014-2024 / MK 3) In this video we can see how to change the low beam headlight bulb of a Citroen Jumper: once the hood of the vehicle is lifted, we can access, albeit…
How to Change the Rear Light Bulbs on the Citroen Jumper - Fiat Ducato
How to Change the Rear Light Bulbs on the Citroen Jumper - Fiat Ducato
Citroen Jumper (1994-2006 / MK 1) This guide outlines the steps to remove and replace the rear light on the Citroen Jumper, Fiat Ducato, and Peugeot Boxer. First, unscrew the two fixi…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos