|
Do it yourself
| |||
| ||||
How to Replace the Headlights on a Citroen Jumper - Fiat Ducato
Model: Citroen Jumper
MK 2
- Years:
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Video tutorial
Today's steps will show you how to remove and replace the front headlight of the Citroen Jumper, as well as the Fiat Ducato and Peugeot Boxer. First, open the bonnet and start by removing the plastic grille from the front bumper; then unscrew the fixing screws of the headlight, which are located at the top, disconnecting the bulb's electrical connector to remove it, as shown in the video. At this point, replace the position bulbs or the headlight bulbs if necessary, or replace the entire headlight unit; all that is left is to reassemble everything!
Updated on 17 October 2026 by ScegliAuto
Related tutorials
Citroen Jumper
(2006-2014 /
MK 2)
.. switch of the Citroen Jumper, as well as the Fiat Ducato. First, open the front door and start unscrewing all the fixing screws found on the sides.. …
Citroen Jumper
(2014-2024 /
MK 3)
.. Citroen Jumper, as well as the Peugeot Boxer and Fiat Ducato. First, open the bonnet and start unscrewing the fixing screws of the front light unit,.. …
Citroen Jumper
(1994-2006 /
MK 1)
.. and replace the rear light on the Citroen Jumper, Fiat Ducato, and Peugeot Boxer. First, unscrew the two fixing screws of the rear light found on the.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
How to Reset the Tyre Pressure Light on the Hyundai i20
These brief instructions will show you how to reset the tyre pressure monitoring system (TPMS) light on the Hyundai i20. Before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get inside the cabin and turn on the ignition. Now, press and hold the TPMS reset button located on the left side of the driver's seat until the tyre pressure light resets on the instrument panel, as shown in the video. At this point, turn off the ignition and start the engine to complete the process! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.097
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |