Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlamp Bulb on the Citroen Jumper - Fiat Ducato

Model: Citroen Jumper MK 3 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Headlight bulb

See other generations:
Video tutorial

Today, we will go through the instructions to remove and replace the front headlamp bulb on the Citroen Jumper, as well as the Peugeot Boxer and Fiat Ducato. First, open the bonnet and start unscrewing the fixing screws of the front light unit, disconnecting the bulb's electrical connector to remove it; then remove the plastic cover and unclip the metal spring of the bulb to take it out and replace it with a new one of the correct type and fitting, as shown in the video.

Finally, refit the front light!


Updated on 26 August 2026 by ScegliAuto


Related tutorials

How to Replace the Headlights on a Citroen Jumper - Fiat Ducato
How to Replace the Headlights on a Citroen Jumper - Fiat Ducato
Citroen Jumper (2006-2014 / MK 2) .. headlight of the Citroen Jumper, as well as the Fiat Ducato and Peugeot Boxer. First, open the bonnet and start by removing the plastic grille from.. …
How to Replace the Headlight Bulb on a Citroen Jumper 2
How to Replace the Headlight Bulb on a Citroen Jumper 2
Citroen Jumper (2006-2014 / MK 2) To quickly and correctly replace the headlight bulb on your Citroen Jumper second series (2006-2014), follow the steps below. First, switch off the v…
How to Change the Rear Light Bulbs on the Citroen Jumper - Fiat Ducato
How to Change the Rear Light Bulbs on the Citroen Jumper - Fiat Ducato
Citroen Jumper (1994-2006 / MK 1) .. and replace the rear light on the Citroen Jumper, Fiat Ducato, and Peugeot Boxer. First, unscrew the two fixing screws of the rear light found on the.. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos