Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Rear Light Bulbs on the Citroen Jumper - Fiat Ducato

Model: Citroen Jumper MK 1 - Years 1994-2006
Part: Tail light bulb

This guide outlines the steps to remove and replace the rear light on the Citroen Jumper, Fiat Ducato, and Peugeot Boxer. First, unscrew the two fixing screws of the rear light found on the light unit using a cross-head screwdriver. Then, disconnect the bulb connector at the back to remove the light, as shown in the video. Now, separate the light unit from the bulb holder and replace the bulbs with new ones; you can now reassemble the light unit!

Updated on 11 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the rear light of the Citroen Jumper.
How to disassemble the rear light of the Citroen Jumper.
Citroen Jumper (1994-2006 / MK 1) .. rear light of the Citroen Jumper, as well as the Fiat Ducato. First, let's move to the back of the vehicle and start unscrewing the two fastening screws.. …
Replacing the Front Headlamp Bulb on the Citroen Jumper - Fiat Ducato
Replacing the Front Headlamp Bulb on the Citroen Jumper - Fiat Ducato
Citroen Jumper (2014-2024 / MK 3) .. Citroen Jumper, as well as the Peugeot Boxer and Fiat Ducato. First, open the bonnet and start unscrewing the fixing screws of the front light unit,.. …
How to replace the headlights of the Citroen Jumper - Fiat Ducato
How to replace the headlights of the Citroen Jumper - Fiat Ducato
Citroen Jumper (2006-2014 / MK 2) .. headlight of the Citroen Jumper, as well as the Fiat Ducato and the Peugeot Boxer. First, we open the hood and start disassembling the plastic grille.. …

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos