Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear light of the Citroen Jumper.

Model: Citroen Jumper MK 1 - Years 1994-2006
Part: Tail light

Today, let's explore the instructions on how to disassemble and replace the rear light of the Citroen Jumper, as well as the Fiat Ducato. First, let's move to the back of the vehicle and start unscrewing the two fastening screws that we find on the rear light, then disconnect the electrical connector of the bulbs located at the back to remove it; after that, if necessary, we will replace the stop bulbs. At this point, we reassemble the rear light and connect the electrical wiring, finally checking the operation of the lights!

Posted on 27 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Citroen Jumper
How to Reset the Service Light on a Citroen Jumper
Citroen Jumper (2006-2014 / MK 2) In today's video, you will see how to reset the service light with the spanner icon on the Citroen Jumper. This light indicates the need for routine …
How and when to replace the timing belt of the Citroen Jumper 2.2 BlueHDi
How and when to replace the timing belt of the Citroen Jumper 2.2 BlueHDi
Citroen Jumper (2014-2024 / MK 3) The main information provided in this guide will show us how and when to disassemble and replace the timing belt of the Citroen Jumper 2.2 BlueHDi, a…
How to reset the service light on the Citroen Jumper 2.2 HDI
How to reset the service light on the Citroen Jumper 2.2 HDI
Citroen Jumper (2006-2014 / MK 2) These short and simple steps will illustrate the process of resetting the service light for the regular maintenance of the engine oil change of the C…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos