Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel of the Citroen Jumper - Fiat Ducato

Model: Citroen Jumper MK 2 - Years 2006-2014
Part: Door trim panel

Follow this guide to remove and replace the door panel and window switch of the Citroen Jumper, as well as the Fiat Ducato. First, open the front door and start unscrewing all the fixing screws found on the sides of the panel and on the opening handle; then detach the door panel by disconnecting the cable of the opening handle, as shown in the video. At this point, if necessary, replace the window switch, applying the reverse procedure for refitting the door panel!

Updated on 5 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Car Radio on Citroen Jumper - Peugeot Boxer - Fiat Ducato
Removing the Car Radio on Citroen Jumper - Peugeot Boxer - Fiat Ducato
Citroen Jumper (2014-2024 / MK 3) .. Jumper, as well as on a Peugeot Boxer and a Fiat Ducato second series. First, get inside the vehicle and insert the appropriate tools into the holes.. …
How to replace the headlights of the Citroen Jumper - Fiat Ducato
How to replace the headlights of the Citroen Jumper - Fiat Ducato
Citroen Jumper (2006-2014 / MK 2) .. headlight of the Citroen Jumper, as well as the Fiat Ducato and the Peugeot Boxer. First, we open the hood and start disassembling the plastic grille.. …
Replacing the Front Headlamp Bulb on the Citroen Jumper - Fiat Ducato
Replacing the Front Headlamp Bulb on the Citroen Jumper - Fiat Ducato
Citroen Jumper (2014-2024 / MK 3) .. Citroen Jumper, as well as the Peugeot Boxer and Fiat Ducato. First, open the bonnet and start unscrewing the fixing screws of the front light unit,.. …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos