Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Jumper
    4. : Disassembly of the car radio on Citroen Jumper - Peugeot Boxer - Fiat Ducato

Citroen Jumper - Video tutorial

Model: Citroen Jumper MK 3 - Years 2014-2023
Part: Car stereo
Operation: Disassembly of the car radio on Citroen Jumper - Peugeot Boxer - Fiat Ducato

In today's video tutorial we will see how to disassemble and replace the original car stereo with the android one on a Citroen Jumper, but also on the Peugeot Boxer and the second series Fiat Ducato. First of all we get on board the car and we go to insert the special tools in the holes of the radio to be able to extract it, as shown in the video; to permanently remove it we will disconnect the electrical connector and the antenna cable that we find on the back. Below is shown how to install the new android car stereo, making the appropriate changes to the electrical system.


Posted on 1 April 2024 by ScegliAuto



Replacement of the front headlight bulb of the Citroen Jumper - Fiat Ducato.
Citroen Jumper (2014-2023 / MK 3) .. bulb of the Citroen Jumper, as well as the Peugeot Boxer and Fiat Ducato. First of all, we open the engine hood and start unscrewing the fixing..
How to change the rear light of the Citroen Jumper - Fiat Ducato
Citroen Jumper (1994-2006 / MK 1) .. rear light of the Citroen Jumper, but also of the Fiat Ducato and the Peugeot Boxer. First we go to unscrew the two fixing screws of the rear light, which..
How to adjust the time in the Citroen Jumper
Citroen Jumper (2006-2014 / MK 2) .. Jumper. This tutorial also applies to the twin Fiat Ducato and Peugeot Boxer models of the same years. First we turn on the dashboard of the vehicle..

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos