Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the side door handle of the Citroen Jumper MK3

Model: Citroen Jumper MK 3 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Handle

See other generations:
Video tutorial

To change the side handle of the Citroen Jumper, we open the tailgate, using a screwdriver and working in the openings around the handle. We disconnect the linkages of the external and internal lever locks: these are operations that require a little patience and delicacy.

We unscrew the screw on the frame of the door, and the two 10mm bolts on the inside to remove the old handle permanently. We also remove the two housings where the tailgate pins are inserted, and replace them with two new ones.

We insert the new handle and reattach the three linkages, screwing in the three screws to secure it.


Posted on 6 March 2025 by ScegliAuto


Related tutorials

Replacing the Front Headlamp Bulb on the Citroen Jumper - Fiat Ducato
Replacing the Front Headlamp Bulb on the Citroen Jumper - Fiat Ducato
Citroen Jumper (2014-2024 / MK 3) Today, we will go through the instructions to remove and replace the front headlamp bulb on the Citroen Jumper, as well as the Peugeot Boxer and Fiat…
What is the Fuse Diagram for the Citroen Jumper Van?
What is the Fuse Diagram for the Citroen Jumper Van?
Citroen Jumper (2006-2014 / MK 2) If a device in your Citroen Jumper van suddenly stops working, the first thing you can do is check the status of the respective fuses, the diagrams f…
Removing the Door Panel of the Citroen Jumper - Fiat Ducato
Removing the Door Panel of the Citroen Jumper - Fiat Ducato
Citroen Jumper (2006-2014 / MK 2) Follow this guide to remove and replace the door panel and window switch of the Citroen Jumper, as well as the Fiat Ducato. First, open the front doo…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos