Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What is the Fuse Diagram for the Citroen Jumper Van?

Model: Citroen Jumper MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Fuse box

See other generations:
Video tutorial

If a device in your Citroen Jumper van suddenly stops working, the first thing you can do is check the status of the respective fuses, the diagrams for which are indicated in this video. As shown, the first two fuse boxes are located inside the cabin, in the lower area of the dashboard on the driver's side and at the base of the right side pillar.

The third and final box is located in the engine compartment, protected by the plastic cover on the left side. In case of a blown fuse, ensure you use a replacement with the same specifications.


Updated on 27 August 2026 by ScegliAuto


Related tutorials

Fuses Location and Diagram for the Citroën Jumper
Fuses Location and Diagram for the Citroën Jumper
Citroen Jumper (2006-2014 / MK 2) Today's main instructions will illustrate the positioning of the fuse boxes and how to find their diagram for the Citroën Jumper. First, open the dri…
Where are the radio fuses located in the Citroen Jumper van?
Citroen Jumper (2014-2024 / MK 3) If the radio in your Citroen Jumper van suddenly stops working, the first thing you can do is check the status of the respective fuses, the location …
Fuse box schema and positioning of the Citroen Jumper
Fuse box schema and positioning of the Citroen Jumper
Citroen Jumper (2014-2024 / MK 3) Today we will see the information regarding the layout and positioning of the fuse boxes of the Citroen Jumper. First, we climb aboard the cabin and …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos