Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the handle of the sliding side door of the Citroen Jumper

Model: Citroen Jumper MK 3 - Years 2014-2024
Part: Handle

In this video, we can see how to change the handle of the sliding door of the Citroen Jumper (the same instructions are also suitable for the Fiat Ducato and the Peugeot Boxer). We can find the handle, for example, on Amazon with the code B0BXWC6F44 at a price of 25.99, with free delivery for Prime customers. First, we need to remove the screw found in the hole at the top of the door thickness, so that we can release the internal door panel, from which we will remove the first clips (it is not necessary to remove it all). Inside, we will find two more screws to remove, which will allow us to remove the handle from its housing, then we remove the rod that allows the door to slide. We place the new handle in its place following the reverse path.

Posted on 18 June 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the side door handle of the Citroen Jumper MK3
Replacement of the side door handle of the Citroen Jumper MK3
Citroen Jumper (2014-2024 / MK 3) To change the side handle of the Citroen Jumper, we open the tailgate, using a screwdriver and working in the openings around the handle. We disconne…
Removing the Door Panel of the Citroen Jumper - Fiat Ducato
Removing the Door Panel of the Citroen Jumper - Fiat Ducato
Citroen Jumper (2006-2014 / MK 2) Follow this guide to remove and replace the door panel and window switch of the Citroen Jumper, as well as the Fiat Ducato. First, open the front doo…
Where is the OBD2 port located on the Citroen Jumper?
Where is the OBD2 port located on the Citroen Jumper?
Citroen Jumper (2006-2014 / MK 2) If you are curious to find out where the OBD2 port is located in your Citroen Jumper, all you need to do is carefully read the steps described in the…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos