Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the bulb in the Citroen Jumper

Model: Citroen Jumper MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Headlight bulb

See other generations:
Video tutorial

In this article we will show you how to replace the headlight bulb of the Citroen Jumper 2nd series. For this operation no tools are needed.

To replace the bulb, first of all, you need to open the hood and lock it with the appropriate fixing rod, after which on the back of the headlight there is a plastic cover, remove the cover, then you need to grab the bulb and pull it outwards, once extracted you need to remove the connector by pressing on the 2 plastic clips and removing the bulb, at this point replace the bulb, inserting it into the connector, insert the new bulb into the appropriate housing and close it with the previously removed cover.


Posted on 14 May 2025 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb on a Citroen Jumper 2
How to Replace the Headlight Bulb on a Citroen Jumper 2
Citroen Jumper (2006-2014 / MK 2) To quickly and correctly replace the headlight bulb on your Citroen Jumper second series (2006-2014), follow the steps below. First, switch off the v…
Replacing the Front Headlamp Bulb on the Citroen Jumper - Fiat Ducato
Replacing the Front Headlamp Bulb on the Citroen Jumper - Fiat Ducato
Citroen Jumper (2014-2024 / MK 3) Today, we will go through the instructions to remove and replace the front headlamp bulb on the Citroen Jumper, as well as the Peugeot Boxer and Fiat…
How to change the low beam headlight bulb of a Citroen Jumper
How to change the low beam headlight bulb of a Citroen Jumper
Citroen Jumper (2014-2024 / MK 3) Today we will see how to change the dipped beam bulb of a Citroen Jumper mk3. So let's start the procedure by removing the body parts that hide the h…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos