Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the inner door panel of the Citroen C3 MK1

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Car door

In this video we will see how to remove the inner panel of the front door of a Citroen C3. First, we will remove the screw inside the car's inner handle. On the outer side at the top of the panel we find a second screw, and a third one moving to the same side, but at the bottom. Now the door is held only by the clips that are inserted along the entire perimeter of the panel. We pull starting from the bottom, using a pry tool, but always gently to avoid breaking them. This car does not have electrical connections, so just pull the panel to remove it completely.

Posted on 2 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the internal door handle of the Citroen C3
How to disassemble the internal door handle of the Citroen C3
Citroen C3 (2002-2009 / FC, FN) The following procedure will show us how to disassemble and replace the internal handle of the front door of the Citroen C3. First, we get into the c…
How to disassemble the front door panel of the Citroen C3
How to disassemble the front door panel of the Citroen C3
Citroen C3 (2002-2009 / FC, FN) Today we will see the instructions for disassembling and removing the front door panel of the Citroen C3. First, we open the front door of the car an…
How to disassemble the front door panel of the Citroen C3
Citroen C3 (2002-2009 / FC, FN) In this video we can see how to dismantle the front panel of a Citroen C3 MK1: first we need to remove the two screws on the outer side of the panel;…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos