Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the side direction indicator located under the exterior mirror of the Citroen C4

Model: Citroen C4 MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Side mirror

See other generations:
Video tutorial

In this video, we see how to remove the side turn signal indicator located under the exterior mirror on a Citroen C4. First, we need to open the mirror in the travel position, then we pry with a screwdriver or a spatula on the outer side of the bottom part of the mirror, where the turn signal indicator is located, in order to remove it from its housing.

Disconnect the electrical connector found inside, so that we can remove the component.

If necessary, open it from the back, in order to remove the bulb and replace it before putting everything back in place.


Posted on 1 June 2025 by ScegliAuto


Related tutorials

Guide to Removing the Wing Mirror Cover on the Citroen C4
Guide to Removing the Wing Mirror Cover on the Citroen C4
Citroen C4 (2004-2010 / MK 1) Today, we will guide you through the process of removing the entire external wing mirror and replacing the plastic cover on the Citroen C4. First, re…
Removing the External Wing Mirror on Citroen C4
Removing the External Wing Mirror on Citroen C4
Citroen C4 (2004-2010 / MK 1) In this video tutorial, you will find instructions for removing the external wing mirror on a first-generation Citroen C4 by following these simple s…
How to disassemble the external rearview mirror of the Citroen C4
How to disassemble the external rearview mirror of the Citroen C4
Citroen C4 (2004-2010 / MK 1) Today's information will allow us to disassemble and replace the external rearview mirror of the Citroen C1. First, we open the front door of the car…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos